How To Setup And Login To Tenda Router?
Routers are a necessity since most of the aspects of life are dependent on internet these days. A router helps you connect to the internet to which all your devices are connected. It has the feature of circulating your wired LAN network connection into Wi-Fi internet connection. Most of the routers does have Ethernet slots through which you can connect your computer and other devices to utilize the internet or establish a wireless connection. One of the popular routers in the market are Tenda routers. You can easily set them up for a home of office Wi-Fi network. Here we will have a look at the process of your Tenda setup. The router should be setup properly. When you purchase the router, it is set to factory default settings. These configuration are mentioned in the manual you must have received while purchasing the router. The default login credentials are also mentioned at the back of the router on a sticker. As a part of configuring the router, you must change the default credentials and customize it to avoid unwanted access to your router.
Before configuring the router
settings, you must setup the router physically at a proper place. Unbox the
router and connect it to a power adapter. Then, connect a Ethernet cable to
your computer and router. Thereafter, switch on the router and you will see the
lights on the router blinking. The Tenda router must be placed on a smooth
surface and not obstructed by many electrical devices.
Steps to login to Tenda router:
· Open a web browser in a device
connected to the router and type 192.168.0.1 in the URL section.
· You will be directed to the login
page. Login through the default credentials.
· Then, click on the settings button
and select the internet connection as PPPoE.
· Here, you can go forward with default
Tenda login password. Change the password from default and apply the
changes.
· Then, click on wireless connection
and select the enable button.
· Enter the username of your Wi-Fi
connection. It will be visible on your devices to recognize the network.
· Edit and modify other settings.
· Then, click on save to apply the
changes.
Follow the steps mentioned above and
the router configuration would be completed. You can any time change the
settings by logging into router.com. You can enter the name of your
router and access the web page by logging in through the default credentials.
Thereafter, you can click on the
Wi-Fi button or icon on your devices. You will see a list of available network
within the range. Click on the name of your Wi-Fi. The device will ask for a
password to establish a connection. Enter your password and click ok. Then, the
device will be able to access the internet through the router.
Comments
Post a Comment